Green's Sawmill Services

Prices

Following are the rates for sawing at various locations and conditions
Rates for clean straight logs >12" dia, straight sawn
Client site – w/client provided labor $.35/bf $350 min
Client site – sawyer provided labor/Flat stacked $.425/bf $350 min
Client site – sawyer provided labor with stickering of lumber $.50/bf $350 min
While U wait/Client provided labor at sawyer site $.35/bf No minimum fee at sawyer site
Drop off at Sawyer site – Flat Stacked $.425/bf No minimum fee at sawyer site

Rates for Small, dirty, short or cooked logs, thin cut & quartersawing
Small, dirty, short or crooked logs. Specialty sawing – thin cuts, quartersawn, slabs, beams, half sawn, cookies, etc. Outside scope work such as log prep, delimbing, bucking logs,sawing slabs into firewood, etc $70/hr $350 min No minimum fee at sawyer site
Thin cuts( defined as less than 1 thick) will be billed as if they were 1" thick."

Mobilization and other fees:
Mobilization to site (One way – daily charge if multiple trips required) $1.00/mile 50 miles or less
Mobilization to site (One way – daily charge if multiple trips required) $2.00/mile All mileage over 50 miles per day
Multiple Relocations of mill on site $25/occurrence
Remote sawing (Over 75 miles from home base in Hinton) To Be Discussed Lodging, per diem and travel fees may apply
Foreign material Blade Damage $30/blade Wire, nails, bullets, rocks, etc
Dry Stickers (approximately 1 thick 1-2 inches wide)" $.10 per foot

Definitions and Notes
BF (Board Foot)= 144 cubic inches of wood (a board 1"X12"X12"  2"X6" X12"  1"X6"X24" etc) Thin cuts (less than 1" thick) are counted as 1" or will be billed as hourly
Payment is required by cash or check weekly or immediately upon completion of milling – whichever occurs first
WV Sales tax applies as appropriate – if you are tax exempt provide an exemption certificate prior to completion of sawing or you will be charged WV sales tax
Having your logs ready to saw (properly cut to length, trimmed of all knots and limbs, and neatly staged) with dunnage or pallets for stacking ready for use, and having good help ready to work will save you time and money on your sawing job, mileage and fees.